Accessories

Dosing Panel
* Electronic dosing pump for controlled feeding of liquid finishing compound.
* One or more pumps as per process requirement.
* Rotameter1 for regulating water quantity mixed with finishing compound for diluting to required strength.
* Rotameter2 for regulating water in larger quantity during wash operation.
* Usually dosing panel operation is controlled by PLC panel

Sound Cover
* For Reducing noise level below 60 db.
* Restricts splashing of foaming finishing compound.
* It may be manually operated manually or by pneumatic cylinder using electrical pulse.

Loading Conveyor
* For loading of components into vibratory finishing bowl.
* Many other customized options available to suit a particular application like lift and tilt loader, hydraulic loader, bucket conveyor, vibro feeder etc.

PLC Panel
*It can fully integrate the operations of all the modules viz. Loading Conveyor, Sound Cover, Dosing Panel, Drain, Flapper Actuation,Bowl start stop, Transfer Conveyor, Dryer Etc.
*Easy to maintain & gives flexibility of operation.
*Quite useful when processing multiple components with different process parameters in the same vibro finishing system.
*Touch Screen or Traditional HMI.

Control Panel with V S D
* It helps in controlling the vibration intensity while processing soft, fragile parts.
* Lower motor speed is useful for controlled discharge of components from bowl and during separation cycle.

Simple Control Panel
* Gives electrical protection to special vibratory motor.
* With or without timer option.
* Motor rotation direction can be reversed (as required during unloading).

Magnetic Pick Up
* Used for separation of media and ferrous components when screening is not possible .
* It can be drum type or can be belt type.
* If necessary demagnetiser can be provided.

Vibratory Sorting Table
* Used for separation of media, component and water in SUPER-FIN.
* Two Vibro motors give uniform lateral movement to media and components.
* It can be used as transfer table, oiling table, washing table etc. in a finishing system.

Belt Dryer
* Comprises of belt conveyor and hot air blowing arrangement ( open circuit or close loop).
* Useful for bigger parts where corn cob drying is not recommended due to blind holes (clogging problem).
* Length of belt and heating capacity will be customized as per requirement of specific component.

Transfer Conveyor
* Typically belt conveyor to interlink various modules of finishing system, like a common dryer for two or more Vibrators or transferring part to polishing Vibrator after roughing operation etc.

Effluent Treatment Plant
* Used for trapping solid particles from the liquid drained from Vibrator.
* To neutralize the liquid discharged from the bowl.
* System to be designed as per specific need.

Request a Quote

Accessories

Product Range

Accessories